Toyota Celsior (Sedan) Celsior I 1989,1990,1991,1992,1993,1994 Specs
General information
Brand
Toyota
Model
Celsior (Sedan)
Version
Celsior I
Engine version
4.0 V8 (260 Hp)
Year production start
1989
Year production end
1994
Vehicle type
Sedan
Horsepower RPM
260 Hp @ 5400 rpm.
Curb weight kg -lbs total
1690 kg
3725.81 lbs.
Overall length mm - inch
4995 mm
196.65 in.
Doors
4
Engine specs
Designation model
1UZ-FE
Cam configuration
DOHC
Engine position and orientation
Front, Longitudinal
Cylinders
8
Position of cylinders
V-engine
Displacement (liters)
3968 cm3
242.14 cu. in.
Eng. horsepower RPM
260 Hp @ 5400 rpm.
Horsepower per litre
65.5 Hp/l
Weight / horsepower kg/hp - hp/tons
6.5 kg/Hp
153.8 Hp/tonne
Weight / torque kg/Nm - Nm/tons
4.8 kg/Nm, 208.9 Nm/tonne
4.8 kg/Nm
208.9 Nm/tonne
Torque Nm RPM lb-ft RPM
353 Nm @ 4600 rpm.
260.36 lb.-ft. @ 4600 rpm.
Bore (mm in)
87.5 mm
3.44 in.
Stroke (mm in)
82.5 mm
3.25 in.
Compression ratio
10
Fuel delivery system
Multi-point indirect injection
Fuel type
Petrol (Gasoline)
Valvetrain
4
Engine aspiration
Naturally aspirated engine
Engine oil liters | quarts
4.8 l
5.07 US qt | 4.22 UK qt
Powertrain architecture
Internal Combustion engine
Engine location
Front, Longitudinal
Transmission and Drive system
Drive configuration
Rear wheel drive
Brakes
Front brakes
Ventilated discs
Rear brakes
Ventilated discs
Steering
Turning diameter m - ft
11 m
36.09 ft.
Suspension
Front suspension
Coil spring
Rear suspension
Double wishbone
Body / Chassis
Wheels & Tyres
Wheels size
215/65R 15 96H
Wheels rims
6.5JJ x 15
Exterior
Interior
Safety and Security
Passenger
Passengers seats
5
Dimensions
Overall length mm - inch
4995 mm
196.65 in.
Overall width mm -inch
1820 mm
71.65 in.
Overall height mm -inch
1425 mm
56.1 in.
Wheelbase mm - inch
2815 mm
110.83 in.
Weights
Curb weight kg -lbs total
1690 kg
3725.81 lbs.
Fuel tank liters | gallons
85 l
22.45 US gal | 18.7 UK gal
Fuel economy
Engine type
8 CYLINDER V-Engine
It's an engine with eight cylinder piston where the cylinders share a common crankshaft and are arranged in a V configuration.
What is the 8 cylinder V-engine displacement: it is in a range between 2926 cc and 8135 cc in recent model line up powertrain.
How much is the power of the 8 cylinder V-engine: the power of the 8 cylinder V-engine is in a range from 125 bhp to 1160 bhp.
Which cars use 8 cylinder V-engine: in recent years several manufactures have been used the V8 engine for 3 main applications: premium, sport cars and lightweight trucks. 8 V engine is the American preferred engine for iconic giant pick-up.
What is the eight cylinder V angle: the majority of V8 engines use a V-angle of 90 degrees. This angle results in good engine balance and low vibrations. The downside is a larger powertrain body that makes the use of this configuration suitable only for longitudinal position and rear drive wheels traction.
V8 engines with a 60 degree V-angle were used in the 1996-1999 by Ford and in 2005-2011 by Volvo. The Ford engine used a 60 degree V-angle because it was based on a V6 engine with a 60 degree V-angle. Both the Ford and Volvo engines were used in transverse engine chassis, which were designed for a front-wheel-drive layout. To reduce the vibrations caused by the unbalanced 60 degree V-angle, Volvo's used a balance shaft and offset split crankpins.
The Rolls-Royce Meteorite tank engine also used a 60 degree V-angle, since it was derived from the 60 degree V12 Rolls-Royce Meteor which in turn was based on the famous Rolls-Royce Merlin V12 engine.
Most V8 engines fitted to road cars use a cross-plane crankshaft, since this configuration produces less vibration due to the perfect primary balance and secondary balance.
The rumbling exhaust sound produced by a typical cross-plane V8 engine is partly due to the uneven firing order within each of the two banks of four cylinders and with separate exhaust systems for each bank of cylinders, this uneven pulsing creates the legendary rumbling sound that is typically of V8 engines.
