Coupe, 2 Doors, 4 Seats
7.8 l/100 km 30.16 US mpg
10.4 l/100 km 22.62 US mpg
6.4 l/100 km 36.75 US mpg
200 Hp @ 7000 rpm.
100.1 Hp/l
226 km/h 140.43 mph
1998 cm3
121.93 cu. in.
4, Boxer
Rear wheel drive,
4240 mm
166.93 in.
1775 mm
69.88 in.
1239 kg
2731.53 lbs.
| Brand | Toyota |
|---|---|
| Model | 86 (Coupe) |
| Version | 86 I |
| Engine version | 2.0 D-4S (200 Hp) MT |
| Year production start | 2012 |
| Year production end | 2016 |
| Vehicle type | Coupe |
| Horsepower RPM | 200 Hp @ 7000 rpm. |
| Acceleration 0 - 100 kmh sec | 7.6 sec |
| Curb weight kg -lbs total |
1239 kg2731.53 lbs. |
| Overall length mm - inch |
4240 mm166.93 in. |
| Doors | 2 |
| Top Speed | 226 km/h 140.43 mph |
| Designation model | FA20 |
|---|---|
| Cam configuration | DOHC |
| Engine position and orientation | Front, Longitudinal |
| Cylinders | 4 |
| Position of cylinders | Boxer |
| Displacement (liters) |
1998 cm3121.93 cu. in. |
| Eng. horsepower RPM | 200 Hp @ 7000 rpm. |
| Horsepower per litre | 100.1 Hp/l |
| Weight / horsepower kg/hp - hp/tons |
6.2 kg/Hp161.4 Hp/tonne |
| Weight / torque kg/Nm - Nm/tons | 6 kg/Nm, 165.5 Nm/tonne
6 kg/Nm165.5 Nm/tonne |
| Torque Nm RPM lb-ft RPM |
205 Nm @ 6400-6600 rpm.151.2 lb.-ft. @ 6400-6600 rpm. |
| Bore (mm in) |
86 mm3.39 in. |
| Stroke (mm in) |
86 mm3.39 in. |
| Compression ratio | 12.5 |
| Fuel delivery system | Direct injection |
| Fuel type | Petrol (Gasoline) |
| Valvetrain | 4 |
| Engine aspiration | Naturally aspirated engine |
| Engine oil liters | quarts |
5.4 l5.71 US qt | 4.75 UK qt |
| Engine coolant |
7.2 l7.61 US qt | 6.34 UK qt |
| Emission certification | Euro 5 J |
| Powertrain architecture | Internal Combustion engine |
| Engine location | Front, Longitudinal |
| Drive configuration | Rear wheel drive |
|---|---|
| Transmission | 6 |
| Front brakes | Ventilated discs |
|---|---|
| Rear brakes | Ventilated discs |
| Anti-lock brake system | ABS (Anti-lock braking system) |
| Steering type | Steering rack and pinion |
|---|---|
| Turning diameter m - ft |
10.8 m35.43 ft. |
| Front suspension | Independent, Spring McPherson, with stabilizer |
|---|---|
| Rear suspension | Double wishbone |
| Passengers seats | 4 |
|---|---|
| Trunk space min liter | cu. Ft. |
243 l8.58 cu. ft. |
| Overall length mm - inch |
4240 mm166.93 in. |
|---|---|
| Overall width mm -inch |
1775 mm69.88 in. |
| Overall height mm -inch |
1285 mm50.59 in. |
| Wheelbase mm - inch |
2570 mm101.18 in. |
| Track width front mm - inch |
1520 mm59.84 in. |
| Track width rear mm - inch |
1540 mm60.63 in. |
| Curb weight kg -lbs total |
1239 kg2731.53 lbs. |
|---|---|
| Gross weight kg -lbs total |
1670 kg3681.72 lbs. |
| Capacities kg - lbs |
431 kg950.19 lbs. |
| Fuel tank liters | gallons |
50 l13.21 US gal | 11 UK gal |
| City l/100km - mpg |
10.4 l/100 km22.62 US mpg |
|---|---|
| Highway l/100 km - mpg |
6.4 l/100 km36.75 US mpg |
| Combined l/100 km - Mpg |
7.8 l/100 km30.16 US mpg |
| Autonomy km (combined use) | 641 |
4 CYLINDER - BOXER
What engine is the 4 cylinder boxer: the boxer-four is an engine where each pair
of opposed pistons moves inwards and outwards at the same time in two banks of
cylinders lying on opposite sides of a common crankshaft, named laso flat-four
or opposed-four.
What is the 4 cylinder boxer displacement: it is in a range between 1350 cc and
3000 cc in recent model line up powertrain.
How much is the power of the 4 cylinders boxer: the power of the 4 cylinders is
in a range from 98bhp to 365 bhp.Which cars use 4 cylinder boxer engine: 4 boxer is used by Porsche and Subaru but it has a strong heritage in powertrain production as have been used in cars by Volkswagen on the original iconic Beetle and Alfa Romeo.
The advantages of the boxer-four layout are perfect secondary vibration (resulting in minimal vibration), low centre of gravity and a short engine length. The layout also lends itself to efficient air cooling with the airflow being evenly distributed across the four cylinders. The downsides of boxer-four engines (compared with inline-four engines) are extra width, higher costs due to two cylinder heads instead of one and the long exhaust manifold required to achieve evenly spaced exhaust pulses.
The typical firing order for a boxer-four engine is for the left bank of cylinders to ignite one after another, followed by the right bank of cylinders with the firing interval evenly spaced at 180 degrees. The exhausts manifold from the two cylinders on each bank were merged and in result uneven exhaust pulses causing a characteristic "flat-four burble" exhaust sound as on Porsche 982 and 718 series with boxer 4.
The engine fires once every 180 degrees crankshaft angle (720 degrees divided by 4 = 180 degrees) and other common firing configuration (such as used by Subaru since the mid-2000s) is to pair the cylinders, with a firing interval of 360 degrees, in order to optimise the exhaust pulses. This configuration requires long exhaust manifolds to pair the cylinders on opposite banks and results in a less distinctive exhaust sound.
edited by arrabbiata