Subaru Impreza (Sedan) Impreza IV Sedan (facelift 2015) 2015,2016 Specs
General information
Brand
Subaru
Model
Impreza (Sedan)
Version
Impreza IV Sedan (facelift 2015)
Engine version
2.0i (150 Hp) AWD Lineartronic
Year production start
2015
Year production end
2016
Vehicle type
Sedan
Horsepower RPM
150 Hp @ 6200 rpm.
Acceleration 0 - 100 kmh sec
11.1 sec
Curb weight kg -lbs total
1375 kg
3031.36 lbs.
Overall length mm - inch
4585 mm
180.51 in.
Doors
4
Engine specs
Designation model
FB20
Cam configuration
DOHC
Engine position and orientation
Front, Longitudinal
Cylinders
4
Position of cylinders
Boxer
Displacement (liters)
1995 cm3
121.74 cu. in.
Eng. horsepower RPM
150 Hp @ 6200 rpm.
Horsepower per litre
75.2 Hp/l
Weight / horsepower kg/hp - hp/tons
9.2 kg/Hp
109.1 Hp/tonne
Weight / torque kg/Nm - Nm/tons
7 kg/Nm, 142.5 Nm/tonne
7 kg/Nm
142.5 Nm/tonne
Torque Nm RPM lb-ft RPM
196 Nm @ 4200 rpm.
144.56 lb.-ft. @ 4200 rpm.
Bore (mm in)
84 mm
3.31 in.
Stroke (mm in)
90 mm
3.54 in.
Compression ratio
10.5
Fuel delivery system
Multi-point indirect injection
Fuel type
Petrol (Gasoline)
Valvetrain
4
Engine aspiration
Naturally aspirated engine
Engine oil liters | quarts
4.8 l
5.07 US qt | 4.22 UK qt
Engine coolant
7.7-8.5 l
8.14 - 8.98 US qt | 6.78 - 7.48 UK qt
Emission certification
Euro 5
Powertrain architecture
Internal Combustion engine
Engine location
Front, Longitudinal
Transmission and Drive system
Drive configuration
All wheel drive (4x4)
Brakes
Front brakes
Ventilated discs
Rear brakes
Disc
Anti-lock brake system
ABS (Anti-lock braking system)
Steering
Steering type
Steering rack and pinion
Turning diameter m - ft
10.6 m
34.78 ft.
Suspension
Front suspension
Independent, Spring McPherson, with stabilizer
Rear suspension
Double wishbone
Body / Chassis
Wheels & Tyres
Wheels size
205/55 R16 91V
Wheels rims
6.5J x 16
Exterior
Interior
Safety and Security
Passenger
Passengers seats
5
Trunk space min liter | cu. Ft.
460 l
16.24 cu. ft.
Dimensions
Overall length mm - inch
4585 mm
180.51 in.
Overall width mm -inch
1740 mm
68.5 in.
Overall height mm -inch
1465 mm
57.68 in.
Wheelbase mm - inch
2645 mm
104.13 in.
Track width front mm - inch
1510 mm
59.45 in.
Track width rear mm - inch
1515 mm
59.65 in.
Weights
Curb weight kg -lbs total
1375 kg
3031.36 lbs.
Fuel tank liters | gallons
55 l
14.53 US gal | 12.1 UK gal
Fuel economy
City l/100km - mpg
8.9 l/100 km
26.43 US mpg
Highway l/100 km - mpg
5.6 l/100 km
42 US mpg
Combined l/100 km - Mpg
6.8 l/100 km
34.59 US mpg
Autonomy km (combined use)
809
Engine type
4 CYLINDER - BOXER
What engine is the 4 cylinder boxer: the boxer-four is an engine where each pair
of opposed pistons moves inwards and outwards at the same time in two banks of
cylinders lying on opposite sides of a common crankshaft, named laso flat-four
or opposed-four.
What is the 4 cylinder boxer displacement: it is in a range between 1350 cc and
3000 cc in recent model line up powertrain.
How much is the power of the 4 cylinders boxer: the power of the 4 cylinders is
in a range from 98bhp to 365 bhp.Which cars use 4 cylinder boxer engine: 4 boxer is used by Porsche and Subaru but it has a strong heritage in powertrain production as have been used in cars by Volkswagen on the original iconic Beetle and Alfa Romeo.
The advantages of the boxer-four layout are perfect secondary vibration (resulting in minimal vibration), low centre of gravity and a short engine length. The layout also lends itself to efficient air cooling with the airflow being evenly distributed across the four cylinders. The downsides of boxer-four engines (compared with inline-four engines) are extra width, higher costs due to two cylinder heads instead of one and the long exhaust manifold required to achieve evenly spaced exhaust pulses.
The typical firing order for a boxer-four engine is for the left bank of cylinders to ignite one after another, followed by the right bank of cylinders with the firing interval evenly spaced at 180 degrees. The exhausts manifold from the two cylinders on each bank were merged and in result uneven exhaust pulses causing a characteristic "flat-four burble" exhaust sound as on Porsche 982 and 718 series with boxer 4.
The engine fires once every 180 degrees crankshaft angle (720 degrees divided by 4 = 180 degrees) and other common firing configuration (such as used by Subaru since the mid-2000s) is to pair the cylinders, with a firing interval of 360 degrees, in order to optimise the exhaust pulses. This configuration requires long exhaust manifolds to pair the cylinders on opposite banks and results in a less distinctive exhaust sound.
