SUV, 5 Doors, 5 Seats
472 Hp @ 6000 rpm.
73.6 Hp/l
257 km/h 159.69 mph
6417 cm3
391.59 cu. in.
8, V-engine
All wheel drive (4x4),
4859 mm
191.3 in.
1958 mm
77.09 in.
2336 kg
5150 lbs.
Brand | Jeep |
---|---|
Model | Grand Cherokee (SUV) |
Version | Grand Cherokee IV (WK2) |
Engine version | SRT8 6.4 V8 (472 Hp) 4WD Automatic |
Year production start | 2011 |
Year production end | 2013 |
Vehicle type | SUV |
Horsepower RPM | 472 Hp @ 6000 rpm. |
Acceleration 0 - 100 kmh sec | 5 sec |
Curb weight kg -lbs total |
2336 kg5150 lbs. |
Overall length mm - inch |
4859 mm191.3 in. |
Doors | 5 |
Top Speed | 257 km/h 159.69 mph |
Cam configuration | OHV |
---|---|
Engine position and orientation | Front, Longitudinal |
Cylinders | 8 |
Position of cylinders | V-engine |
Displacement (liters) |
6417 cm3391.59 cu. in. |
Eng. horsepower RPM | 472 Hp @ 6000 rpm. |
Horsepower per litre | 73.6 Hp/l |
Weight / horsepower kg/hp - hp/tons |
4.9 kg/Hp202.1 Hp/tonne |
Weight / torque kg/Nm - Nm/tons | 3.7 kg/Nm, 267.1 Nm/tonne
3.7 kg/Nm267.1 Nm/tonne |
Torque Nm RPM lb-ft RPM |
624 Nm @ 4200 rpm.460.24 lb.-ft. @ 4200 rpm. |
Bore (mm in) |
103.9 mm4.09 in. |
Stroke (mm in) |
94.5 mm3.72 in. |
Compression ratio | 10.9 |
Fuel delivery system | Multi-point indirect injection |
Fuel type | Petrol (Gasoline) |
Valvetrain | 2 |
Engine aspiration | Naturally aspirated engine |
Engine oil liters | quarts |
6.6 l6.97 US qt | 5.81 UK qt |
Engine coolant |
13.3 l14.05 US qt | 11.7 UK qt |
Emission certification | Euro 5 |
Powertrain architecture | Internal Combustion engine |
Engine location | Front, Longitudinal |
Drive configuration | All wheel drive (4x4) |
---|
Front brakes | Ventilated discs |
---|---|
Rear brakes | Ventilated discs |
Anti-lock brake system | ABS (Anti-lock braking system) |
Steering type | Steering rack and pinion |
---|---|
Turning diameter m - ft |
11.3 m37.07 ft. |
Wheels size | 295/45 R20 |
---|---|
Wheels rims | 20 |
Passengers seats | 5 |
---|
Overall length mm - inch |
4859 mm191.3 in. |
---|---|
Overall width mm -inch |
1958 mm77.09 in. |
Overall height mm -inch |
1756 mm69.13 in. |
Wheelbase mm - inch |
2915 mm114.76 in. |
Track width front mm - inch |
1617 mm63.66 in. |
Track width rear mm - inch |
1633 mm64.29 in. |
Coefficient of drag | 0.39 |
Curb weight kg -lbs total |
2336 kg5150 lbs. |
---|---|
Gross weight kg -lbs total |
2948 kg6499.23 lbs. |
Capacities kg - lbs |
612 kg1349.23 lbs. |
Fuel tank liters | gallons |
93 l24.57 US gal | 20.46 UK gal |
8 CYLINDER V-Engine
It's an engine with eight cylinder piston where the cylinders share a common crankshaft and are arranged in a V configuration.
What is the 8 cylinder V-engine displacement: it is in a range between 2926 cc and 8135 cc in recent model line up powertrain.
How much is the power of the 8 cylinder V-engine: the power of the 8 cylinder V-engine is in a range from 125 bhp to 1160 bhp.
Which cars use 8 cylinder V-engine: in recent years several manufactures have been used the V8 engine for 3 main applications: premium, sport cars and lightweight trucks. 8 V engine is the American preferred engine for iconic giant pick-up.
What is the eight cylinder V angle: the majority of V8 engines use a V-angle of 90 degrees. This angle results in good engine balance and low vibrations. The downside is a larger powertrain body that makes the use of this configuration suitable only for longitudinal position and rear drive wheels traction.
V8 engines with a 60 degree V-angle were used in the 1996-1999 by Ford and in 2005-2011 by Volvo. The Ford engine used a 60 degree V-angle because it was based on a V6 engine with a 60 degree V-angle. Both the Ford and Volvo engines were used in transverse engine chassis, which were designed for a front-wheel-drive layout. To reduce the vibrations caused by the unbalanced 60 degree V-angle, Volvo's used a balance shaft and offset split crankpins.
The Rolls-Royce Meteorite tank engine also used a 60 degree V-angle, since it was derived from the 60 degree V12 Rolls-Royce Meteor which in turn was based on the famous Rolls-Royce Merlin V12 engine.
Most V8 engines fitted to road cars use a cross-plane crankshaft, since this configuration produces less vibration due to the perfect primary balance and secondary balance.
The rumbling exhaust sound produced by a typical cross-plane V8 engine is partly due to the uneven firing order within each of the two banks of four cylinders and with separate exhaust systems for each bank of cylinders, this uneven pulsing creates the legendary rumbling sound that is typically of V8 engines.
edited by arrabbiata